What We Need To Do

You Will Need

1. A Windows PC
   
2. A cable to connect your iPhone to your PC
   
3. The Jailbreak tool (3uTools)
   

Watch the video

Or, follow along with the written guide

1. Download the tool here
   
   
   
2. Open the tool
   
3. Install the tool by pressing Install This should take approximately a minute
   
   
   
4. Click Launch
   
5. You may be asked to install necessary components. (If you don't see this warning, skip to step 10)
   

   Dismiss this warning as we will install the components in a faster manner in the next step
   

   
   
6. Click Repair Driver
   

   
   

7. Click Repair Now
   

   
   
8. If successful, you will see the message in the screenshot below. Replug your iPhone as instructed then click confirm right now
   
9. You’ll now be presented with your device details!
   

   
   
10. Click Flash & JB
    
11. Click Jailbreak then Run Jailbreak
    

12. When complete, you will see the Unc0ver icon on your phone
    

13. Next, go to Settings -> General -> Device Management -> Then tap the Developer App and Tap Trust
    

14. Go back to the unc0ver app and Tap it to open. Then, tap Jailbreak
    

15. Midway through the jailbreak, this ad will appear. Click the X to dismiss and continue the jailbreak 
    

16. Once the jailbreak is complete, the phone will restart. You will know that the jailbreak was successful if you see the Cydia icon on the device.
    

    If you do not see the Cydia icon, you need to run Unc0ver again
    

17. The jailbreak is now complete and you’re ready to install FlexiSPY!